Table of Contents
Advertisement
C.4 Factory Option Sets
Factory Option Set #1 (Asynchronous Dialup with MNP)
• Modem Options
DCE rate—9600
Normal originate
Fast train originate
Auto retrain enabled
Transmit clock internal
Dial line
Jack type RJ-11 (permissive)
Line current disconnect long enabled
Long space disconnect enabled
V.22 guard tone disabled
• Test Options
Bilateral analog loop disabled
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
• MNP Options
MNP protocol enabled
Auto fallback enabled
XON/XOFF pass through disabled
Data compression enabled
MNP activity timer off
MNP break control 5
• Dial Line Options
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
801 V.32 timeout long
Autocallback disabled
• DTE Options
Async data
DTE rate—9600
8 bit
No parity
Async controlled dialer
AT command set enabled
Ignores DTR
DSR forced high
DCD forced high
CTS forced high
DTE fallback disabled
Options retained at disconnect
APPENDIX C: Command Index and Defaults
153
Advertisement
Table of Contents
