Break Control (\Kn) - Black Box 325 User Manual

MODEM 325 AND MODEM 325 CARD
Command
%An
The modem must be configured for auto-reliable mode (AT\N3).
6.14.8 B C
REAK ONTROL
Use AT\Kn (n =0-5) to indicate the action taken by the modem when a break is encountered.
Command
\K
\K1
\K2
\K3
\K4
\K5
†default
Conditions under which breaks may occur are explained below with descriptions of the modem's
response under the different \K command break options.
1. If a break is sent to the serial port while the modem is in connect state during a reliable or normal
connection (no protocol, data buffered):
9 0
Table 6-52. Auto-Reliable Fallback Character (%An).
Operation
Sets ASCII character to be recognized as the auto-reliable fallback character.
(\K )
N
Table 6-53. Break Control (\Kn).
Operation
Break option 0
Break option 1
Break option 2
Break option 3
Break option 4
Break option 5†
NOTE