Table of Contents
Advertisement
MODEM 325 AND MODEM 325 CARD
LSO List stored options.
The separator {sep} is a
<etb><sp><sp><stx>LSO<sp>
sequence for the sync format (the last LSO string terminates with <etx> per V.25 bis). For synchronous
bit-oriented operation, each LSO string is treated as an individual message per V.25 bis.
If no parameters follow, all stored options are sent to the DTE as
LSO<sp>
{sep}
xxx;ooo
Each value must be padded with leading zeros so that each field has three characters. Option zero
would be sent as
LSO<sp>000;000
If only an address follows the command, the single requested option is sent to the DTE as
LSO<sp>
xxx;ooo
If address and count follow the command, the requested count of options starting with the specified
address are sent to the DTE as
LSO<sp>
{sep}
xxx;ooo
8.6 Options
This section lists the options for the V.25 bis autodialer. These options can be changed using the PRO
command or listed using the RLO command.
000 - 001:
Not applicable
002:
Intermediate call progress messages
0 - Disable
1 - Enable
Default value = 0
003:
Blind dial
0 - Disable
1 - Enable
Default value = 0
004 - 006:
Not applicable
007:
Long space disconnect
0 - Disable
1 - Enable
Default value = 1
008 - 019:
Not applicable
020:
Programmable / permissive operation
0 - Permissive
1 - Programmable
Default value = 0
130
xxx;ooo...
xxx;ooo...
Advertisement
Table of Contents
