Table of Contents
Advertisement
MODEM 325 AND MODEM 325 CARD
6.13.2 R
C
EMOTE
ONFIGURATION
This mode of operation allows the modem user to view or modify the option set of a remote modem.
Entering AT%T= (security code of remote) will initiate remote configuration.
Refer to
Chapter 5
Command
%T=
&T
6.14 Protocol Commands
These modes and conditions are selected by AT commands.
availabilities.
Operating
Mode
Normal
Direct
Reliable (MNP)
Auto-reliable
(MNP)
6.14.1 O
M
PERATING
ODE
Sets the operating mode that the modem uses while in data mode. An AT\Nn command issued during
command mode while a connection is in progress will not affect the current connection but will be acted
on for subsequent connections. Refer to
8 6
(%T=)
for description.
Table 6-44. Remote Configuration (%T).
Operation
This command followed by the correct security code establishes remote
configuration mode
Exits remote configuration mode
Table 6-45. Operating Modes and Conditions.
Error
Data
Correction
Compression
Disabled
Disabled
Disabled
Disabled
Enabled
On or off
Enabled
On or off
(\N)
Chapter 9
illustrates mode and condition
Table 6-45
Flow
Data
Control
Allowed
Buffered
Not allowed
Not buffered
Allowed
Buffered
Allowed
Buffered
for descriptions.
Constant
Speed Interface
On or Off
DTE=DCE (slaved)
On
On
Advertisement
Table of Contents
