Table of Contents
Advertisement
MODEM 325 AND MODEM 325 CARD
INVPV
Invalid command—parameter value error.
Examples:
PRL 1;Q
PRL Q;1
PRL 1;45 where only addresses
01 - 09 are defined
8.4.10 R
L
EQUEST
IST OF
The request list of linked numbers command is RLL without parameters.
Responses:
INVCU
Invalid command—command unknown.
Example: TLL
INVMS
Invalid command—message syntax error.
Example: RLL;
LSL List linked numbers.
In all LSL examples, if no number is stored at the specified address no response is sent. The separator
field is an
<etb><sp><sp><stx>LSL<sp>
The last LSL string ends with <etx> per V.25 bis. For synchronous bit oriented operation, each LSL
string is treated as an individual message per V.25 bis. All linked numbers are sent to the DTE as
LSL<sp>
;l{sep}
;l
a
a
where
=stored address and l=link address.
a
8.4.11 R
L
EQUEST
IST OF
The request list of version information command is RLV with no parameters.
Responses:
INVCU
Invalid command—command unknown.
Example: TLV
INVMS
Invalid command—message syntax error.
Example: RLV;
LSV List version
The version information is sent to the DTE as
LSV<sp>S327409
xxx
where
is the code revision of the microcontroller PROM and
xxx
PROM.
The dd is the dash number and the r is the printed circuit board revision.
126
L
N
(RLL)
INKED
UMBERS
V
(RLV)
ERSION
39
ddr<sp>
yyy
is the code revision of the V.25 bis
yyy
Advertisement
Table of Contents
