Example Of Connection Via Vlans - D-Link DIR-300NRU Quick Installation Manual

DIR-300NRU

Example of Connection via VLANs

If your ISP provides:
access to the Internet via the VLAN with the tag (VLAN ID) 2, the
•
PPPoE
user_password,
access to IPTV service via the VLAN with the tag (VLAN ID) 10,
•
and your set-top box is connected to the LAN port 2, then follow the next steps
to configure the router.
1. Go to the Net / Connections page, select the WAN connection and
click the Delete button on the opened page.
2. Go to the Advanced / VLAN page.
3. Select the lan group.
4. Select the line port 2 in the table at the bottom of the page and click the
Delete port button.
5. Click the Save changes button.
6. Select the wan group.
7. In the Name filed, enter a name for the group (INTERNET).
8. From the Type drop-down list, select the NAT value.
9. From the Port drop-down list, select the value port 5 (corresponds to the
INTERNET port of the router).
10. From the Tag drop-down list, select the tagged value.
11. In the VLAN ID field, enter 2.
12. Click the Save changes button.
You have created the group of ports for connection to the Internet.
13. Click the Add button.
14. In the Name field, enter a name for the new group (IPTV).
15. From the Type drop-down list, select the Transparent value.
16. From the Port drop-down list, select the value port 2.
connection type,
Quick Installation Guide
the login user, and the password
10