Camera Setting; Record Settings - Ness IQ-MDVR-4 User Manual

Ness IQ-MDVR-4 – Mobile Black Box Recorder.

6.2.3 CAMERA SETTING

Camera Setting Setup enables the record function and live view for each channel.
ENABLE: Enables the record function for the camera.
NAME: The name of the channel. For example, if you setup the name of CH1 is 'Front Door', you will see
'Front Door' displayed on the live view (for channel 1)
AUDIO: Select is audio is to be recorded for this camera.
LIVE: Select if this camera is to be displayed the live view.
ROUND: Means channel loop function, (Sequential switching mode). If you set the "round time" as 5 seconds,
the channel will display in full screen mode for this time.
VOICE INTERCOM: it's a switch for talk function. It can only be initiated from the server side, e.g. via CMS).
th
NOTE: The audio of 4
4 cannot be used.

6.2.4 RECORD SETTINGS

Selects the configuration for Resolution, frame rate, image quality parameter setting for each channel.
RES: Resolution, D1, HD1, CIF optional. For example: D1 resolution is 704×576, HD1 resolution is 704×288, and
CIF resolution is 354×288.
channel is used for this function. So when using the voice intercom then audio on camera
32
User Manual