4
3
Density
You can set the scan density before scanning the original.
Density refers to the degree of difference between the light and dark areas of an
image.
3-10
Adjusting the Scan Settings
Specify the destination
For instructions on specifying the destination, see "Dialing Methods," on p. 2-2.
If you want to specify other sending conditions, set them before specifying the
destination.
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display
press
complete, press [OK].
Scanning starts.
The scanned data is sent to the destination once scanning is complete.
NOTE
To cancel all settings and return the machine to the standard mode, press
(Reset).
press [Start].
(Start) once for the each original. When scanning is