REPORT NAME
When the document transmission is completed successfully, a "TX REPORT" is printed.
When a send error occurs, a "ERROR TX REPORT" is printed.
MESSAGE
A message describing the transmission result is printed.
TX/RX NO
The four digit number, that is automatically assigned when the document is accepted for
sending, is printed.
RECIPIENT ADDRESS
The fax/telephone number of the recipient is printed.
DESTINATION ID
Registered name for speed dial is printed.
ST. TIME
The date and time (in 24-hour notation) at which the document started to be transmitted
are printed. The start time is printed only for send jobs that have been set with the
Delayed TX setting.
TIME USE
The time taken (in minutes and seconds) to send the document from start to finish is
printed.
PAGES SENT
8
The number of pages that were sent successfully to the other party is printed.
RESULT
If the documents were transmitted successfully, "OK" is printed.
If a sending error occurred, "NG" (No Good) is printed.
If a sending error occurred, the page number in which the error occurred and the error
code number are printed.
8-7
Adjusting the TX REPORT Setting