Canon iR2020 Facsimile Manual page 23

Facsimile Control Panel
a One-Touch Speed Dialing Panels
Open the first panel to display one-touch speed
dialing keys 21-40. Open the second panel to
display keys 41-60.
b One-Touch Speed Dial Keys
Dial numbers registered under one-touch speed
dialing keys.
c Direct TX Key
Sets the machine to the Direct Sending mode so
you can send a document immediately ahead of
other documents stored in memory.
d Delayed TX Key
Press to specify a time for the machine to
automatically send your documents.
e R Key
Press to dial an outside line access number or an
extension number when the unit is connected
through a switchboard (PBX).
f Redial/Pause Key
Redial the previous number that was dialed
manually using the numeric keys.
Press to insert a pause between digits or after the
entire fax number.
g Coded Dial Key
Press [Coded Dial], followed by a three digit code
to dial the telephone number registered for coded
speed dialing.
h Address Book Key
Press to search for names or fax numbers
registered for speed dialing, and then use the
number for dialing.
i FAX Key
Press to switch the machine to the Fax mode.
j COPY Key
Press to switch the machine to the Copy mode.
k Hook Key
Press to activate or deactivate the telephone line.
This is necessary for dialing a fax information
service. (See "The Fax Information Service," on
p. 3-21)
l Stamp Key
Press [Stamp] to apply a stamp on the front side
of originals after they have been scanned, so that
you can determine whether a document was
scanned and sent.
Control Panel Parts and Functions
1
1-7