Canceling Send Jobs
You can cancel a send job using the stop key or the system monitor key.
1
Using the Stop key
Follow the procedure below to cancel sending documents during a transmission.
1
1-40
Canceling Send Jobs
During transmission, press [Stop].
If you are using Direct Sending, an alarm sounds, and the transmission is
canceled immediately.
If you press
(Stop) after the machine has finished scanning, the message
<CANCEL DURING TX/RX?> is displayed.
If you press
(Stop) while the machine is scanning a document placed in the
feeder or during Direct Sending, the message <STOP KEY PRESSED> is
displayed.