7
If you want to cancel sending, press [Stop].
NOTE
•
You can press
•
For instructions on canceling a send job, see "Using the Stop key," on p. 1-40.
•
You can also cancel a send job from the System Monitor screen. (See "Using the
System Monitor Key," on p. 1-41.)
8
When scanning is complete, remove your originals.
9
If the optional Card Reader-E1 is attached, remove the control
card.
NOTE
For instructions on using the optional Card Reader-E1, see Chapter 4, "Optional
Equipment," in the Reference Guide.
Log In/Out
10
If Department ID Management is set, press [ID].
ID
NOTE
For instructions on using Department ID Management, see Chapter 6, "System
Manager Settings," in the Reference Guide.
(Stop) to cancel a send job that is being scanned.
Flow of Sending Operation
1
1-31