Flow Of Sending Operation - Canon iR2020 Facsimile Manual

Flow of Sending Operation

This section describes the flow of basic sending operations.
NOTE
•
Before using the fax function, it is useful to read the following topics:
- Main power and control panel power (See Chapter1, "Before You Start Using This
Machine," in the Reference Guide)
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide)
•
The maximum number of the send jobs that the machine handle is 70. However, the
actual number of send jobs that the machine can handle is fewer than 70, if multiple
documents are being sent at the same time.
•
You can print a report that contains the results of all send jobs. (See "Printing the
ACTIVITY REPORT," on p. 5-6.)
1
Press the appropriate keys in accordance with the messages
displayed on the LCD display.
If there are no messages displayed, proceed to the next step.
If the message <INSERT CONTROL CARD> appears:
Insert a control card into the Card Reader-E1.
NOTE
For instructions on using the Card Reader-E1, see Chapter 4, "Optional
Equipment," in the Reference Guide.

Flow of Sending Operation

1
1-27