Canon iR2020 Facsimile Manual page 207

Name
5. STAMP DOCUMENT
DIRECT&MEMORY TX*
DIRECT TX
6. DIALING LINE CHCK
ON*
OFF
7. ROTATE TX
ON*
OFF
3. RX SETTINGS
1. ECM RX
ON*
OFF
4. PRINTER SETTINGS
1. SELECT DRAWER
2. RECEIVE REDUCTION
ON*
Descriptions
Sets when the documents are stamped.
The documents are stamped when using the direct
sending or the memory sending.
The documents are stamped when using the direct
sending.
Sets whether to use the dialing line check.
Enable the dialing line check.
Disable the dialing line check.
Sets whether the machine rotates the image
automatically to send it horizontally, when the
document is set vertically.
Enable the automatic rotation.
Disable the automatic rotation.
Sets the reception functions.
The ECM (Error Correction Mode) reception is
turned on or off.
All receptions are conducted with ECM if the other
party's fax supports ECM.
ECM is turned off.
Sets the settings related to Printer functions.
Sets how the machine prints documents when
there is no paper matching the size of the received
document: SWITCH A, SWITCH B, SWITCH C,
SWITCH D
Receives images at a reduced size.
Image reduction is turned on.
10-7
Menu Descriptions
10