Canon iR2020 Facsimile Manual page 225

S
Scan area
The scanning area is narrower than the original document size around the entire
border, around the document. Documents you send should have some margin on the
sides and the top and bottom. Anything over this margin cannot be scanned for
sending.
Sender's name
Your name or company's name, your fax number, date and time the document was
sent to the receiving party are printed on each page you send. Your name and
facsimile number are printed at the top of the documents that you send.
Sending speed
The rate at which documents are sent over the phone line. See also bps.
Sequential broadcast
Enables you to send one scanned document to up to 201 destinations by using
one-touch speed dialing, coded speed dialing, and regular dialing. Dial several
numbers to send the document. If you do this frequently, you should register the
numbers for group dialing.
Stamp
The optional stamp feature marks documents that have been scanned for
transmission with a pink mark (
Super Fine
This setting increases the clarity of documents you send. It is four times the standard
resolution.
Super G3
Super G3 is a phrase used to describe the generation of fax machines that use ITU-T
V.34 standard 33.6 Kbps modems. Super G3 high-speed fax machines allow a
transmission time of approximately three seconds per page, which results in reduced
telephone line charges.
) stamped at the bottom of the document.
11
11-11
Glossary