Table of Contents
Advertisement
User Manual of DS-6400HDI-T Decoder
Select a Decoding Channel from the drop-down list for playback.
5.
Enter the device information in the Remote Host IP Address, Remote Host Port, Remote Host Channel
2.
No., and login User Name and Password of the encoding device.
Select the playback mode to Playback by File or Playback by Time.
3.
Playback by file: enter the file name searched on the encoding device.
Playback by time: click
Click Save to finish the settings.
4.
You can click
to start playback.
5.
During the playback, use the
forward, fast forward, and turn on audio respectively.
Notes:
The speed of slow forward can be set to 1/2X, 1/4X and 1/8X; and the speed of fast forward can be set to 2X,
1)
4X and 8X.
During decoding the playback on the screen, if you change the resolution of the video output, the decoding
2)
stops.
4.4 Rebooting, Upgrading and Restoring the
Default Settings for the Decoder
Figure 4.40 Enter Device Information
to enter the start time and end time of the record file.
Figure 4.41 Playback by Time
Figure 4.42 Playback Control
35
buttons to start playing, stop playing, slow
Advertisement
Table of Contents
