Table of Contents
Advertisement
User Manual of DS-6600 Audio/Video Encoder
12.3.1 Restarting the Device
On the Maintenance> Restart interface, click Restart to enter the following dialog box:
Click OK to restart the device or Cancel to cancel the operation.
12.3.2 Restoring Default Settings
On the Maintenance> Default interface,, click Restore or Default to restore device parameters to the factory
settings.
By selecting the Restore button, the device restores the default settings for the parameters except the IP
address, subnet mask, gateway and port.
By selecting the Default button, the device restores the default settings for all parameters.
On the pop-up message box, click OK to restore and reboot the device to validate the settings.
12.3.3 Importing/Exporting Parameters
The configuration files of the device can be exported to local device for backup; and the configuration files of one
Figure 12.4 Restart the Device
Figure 12.5 Restore Default Settings
Figure 12.6 Pop-up Message Box
78
Advertisement
Table of Contents
