Table of Contents
Advertisement
User Manual of DS-6400HDI-T Decoder
4.1.5 Enabling/Disabling the Decoding Channel
Purpose:
The Channel On/Off function enables you to start or stop the decoding and displaying for certain channels.
Steps:
Click Decode Operation > Decode Control > Channel On/Off to enter the following interface:
1.
Select a decode channel in the drop-down list in the Decode Channel field.
2.
Set the decoding channel to On or Off.
3.
Click Save to save the settings.
4.
4.1.6 Configuring Picture Overlay
Purpose:
The Picture Overlay function can overlay a picture on the screen for the selected decode channel, and the position
of the picture overlaid on the screen can also be set here.
Steps:
Click Decode Operation > Decode Control > Picture Overlay to enter the following interface:
1.
Select the decode channel in the drop-down list in the Decoding Channel No. field.
2.
Click Browse to choose a picture from the local directory, and then upload it by clicking the Upload
3.
button.
Set the X coordinate and the Y coordinate of the picture displayed on the screen to move the picture up
4.
and down and left and right.
Figure 4.15 Configure Channel On/Off
Figure 4.16 Configure Picture Overlay
22
Advertisement
Table of Contents
