Table of Contents
Advertisement
User Manual of DS-6400HDI-T Decoder
video output interfaces, the VGA, BNC and HDMI outputs.
Steps:
Click Decode Operation > Decode Mode > Display Control to enter the display control interface:
1.
In the display control interface, you can configure the Display Channel, Video Format (BNC), BNC Output
2.
Scaling (BNC), Output Resolution (VGA, HDMI) and Display Mode.
Select the window-division display mode. The DS-6400HDI-T series supports 1/4/9/16-division display
3.
mode.
Select the decoding channel from the drop-down list for each sub-window.
4.
Click Save to save the settings and the prompt
5.
After having configured the window-division display, the sub-window information can be viewed on the interface.
Example: If you select the display mode as 4, the sub-window configuration field shows the status of the four sub-
windows.
Enlarge/Restore the Sub-window
Task 1: Enlarge the Sub-window
Figure 4.3 Display Configure
Figure 4.4 Configure Display Parameters
Figure 4.5 Sub-window Information
16
pops out.
Advertisement
Table of Contents
