Table of Contents
Advertisement
DS-6700HFHI/V Series Network HD Encoder User Manual
11.2 Viewing Device Information
Click Configuration > System > System Settings > Basic Information to enter the Device Information interface
of the encoder:
You can edit the Device Name and Device No., and view the device information, including Model, Serial No.,
Firmware/Encode Version, Number of Channels, Number of HDDs, and Number of Alarm Input / Output.
11.3 Upgrade & Maintenance
Click Configuration > System > Maintenance > Upgrade & Maintenance to enter the Maintenance interface of
the encoder:
Figure 11. 2 Maintenance Page
11.3.1 Rebooting the Device
On the Upgrade & Maintenance interface, click Reboot to enter the following message box:
Figure 11. 3 Reboot the Device
Click OK to reboot the device or Cancel to cancel the operation.
11.3.2 Restoring Default Settings
On the Upgrade & Maintenance interface, click Restore or Default to restore device parameters to the factory
settings.
71
Advertisement
Table of Contents
