Restoring Default Settings; Importing/Exporting Configuration Files - HIKVISION DS-6700HUHI-K Series User Manual

12.2.2 Restoring Default Settings

Steps:
1. Go to Configuration > System > Maintenance > Upgrade & Maintenance > Default.
2. Click Restore or Default to restore device parameters.

Restore: Restore the device to the default settings for the parameters except the IP address, subnet mask,
gateway and port.

Default: Restore the device to the default settings for all parameters.
3. On the pop-up message box, click OK to restore and reboot the device to validate the settings.

12.2.3 Importing/Exporting Configuration Files

The configuration files of the device can be exported to local device for backup, and the configuration files of one
device can be imported to multiple devices if they are to be configured with the same parameters.

On the Configuration > System > Maintenance > Upgrade & Maintenance > Import Config. File page,
click Browse to select the file from the selected backup device and then click Import to import a
configuration file.
After having finished the import of configuration files, the device will reboot automatically.

On the Configuration > System > Maintenance > Upgrade & Maintenance > Export page, click Device
Parameters to export configuration files to the selected local backup device.
DS-6700HUHI-K Series Encoder User Manual
Figure 12. 5 Restore Default Settings
Figure 12. 6 Pop-up Message Box
Figure 12. 7 Import/Export Config Files
86