HIKVISION DS-6400HDI-T User Manual page 22

User Manual of DS-6400HDI-T Decoder
Select the Screen No. from the drop-down list.
2.
Select the Screen Jointing Mode. Different modes are selectable based on models:
3.
DS-6404HDI-T: 1*2, 2*1, 2*2.
DS-6408HDI-T: 1*2, 2*1, 2*2, 2*3, 3*2, 2*4 and 4*2.
Select the Related Decoding Channel for the selected video wall.
4.
Set the Output Resolution.
5.
Note: You can select the NOT_AVAILABLE option in the Output Resolution to clear the current video wall
configuration.
In the Video Output Configuration area, select the Display Channel for each screen.
6.
Click Save to save the settings.
7.
Notes:
1. The BNC video output does not support large screen display currently.
2. It is recommended to configure the display channels with the same video output type for each large
screen, e.g., VGA1, VGA2, VGA3...; or HDMI1, HDMI2, HDMI3....
The display sequence of sub-screens in different screen modes is shown below:
Figure 4.13 Configure Video Wall
Figure 4.14 Multi-screen Video Wall Display
21