Decoding Operation; Configuring Decoded Video Display - HIKVISION DS-6400HDI-T User Manual

Hikvision hd video/audio decoder

Hide thumbs Also See for DS-6400HDI-T:

Table of Contents

User Manual of DS-6400HDI-T Decoder

Purpose:

Since there is no local operation GUI provided for the decoder, you can manage and configure it by web browser

or the iVMS-4200 client software. In this chapter, the operation and management of the decoder by the web

browser is provided.

Note:

The tested Web browsers include: IE7 and IE8, chrome, safari and firefox4.

Open the Web browser and input the IP address of Decoder (e.g., http://172.9.22.84) to enter the login page:

Figure 4.1 Login Interface

Enter the user name and password of the device in the dialog box and then click Login to log into the system. By

default, the user name for login is admin and the password is 12345.

The main interface of the control panel of the decoder is showed after successful login.

Figure 4.2 Enter WEB Page of Decoder

Decoding Operation

Purpose:

To realize the display of the decoded video on the TV wall, you must set the decoding operation parameters.

Before you start:

Check the cabling of the decoder, and ensure that the decoder is connected to the TV wall or monitor via the video

output interfaces.

To set the video output of the decoder, the first step is to choose the video output interfaces. There are 3 types of

Table of Contents