Table of Contents
Advertisement
User Manual of DS-6400HDI-T Decoder
Run the disk of iVMS-4200 software, and double click the icon to install it in your PC. In this chapter, the basic
procedure of operating the decoder by the software is described.
Please refer to the user manual of iVMS-4200 for more detailed information.
The following figure shows the main interface after accessing to the software:
Note:
The software is capable of many functions as the controlling and managing for many devices, such as the
DVR, NVR, etc. In this manual, only the operation related to the decoder is introduced.
5.1 Adding an Encoder
Steps:
Steps:
Click
in the control panel to enter the decoding device management interfaces.
1.
Click
2.
Add the device by IP address or private domain name (IP server/HiDDNS). You can also add the third-
3.
party encoding device.
Task1:
Add the device by IP address.
1) Edit the nickname of the encoding device.
2) Enter the IP address, port, login user name and password.
3) Click Add to add the device.
Figure 5.1 Control Panel
to enter the Add Device interface.
39
Advertisement
Table of Contents
