Configuring Alarm Input / Output Settings - HIKVISION DS-6400HDI-T User Manual

User Manual of DS-6400HDI-T Decoder
Configure the RS-232 parameters, including the baud rate, data bit, stop bit and parity type.
2.
Select the Operating Mode of RS-232 to Console or Transparent Channel.
3.
Console: use the RS-232 serial port for debugging the decoder.
Transparent Channel: use the RS-232 serial port as the transparent channel.
Click Save to save the settings.
4.
Configuring RS-485 Parameters
Steps:
Click Configuration > Serial Port Settings > RS-485 Port to enter the following interface:
1.
Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type.
2.
Click Save to save the settings.
3.

4.2.6 Configuring Alarm Input / Output Settings

Purpose:
As the Decoder is unable to obtain the alarm signal over network, it must be connected with external alarm
input/output.
Figure 4.32 Configure RS-232 Settings
Figure 4.33 Configure RS-485 Settings
31