Table of Contents
Advertisement
User Manual of DS-6400HDI-T Decoder
5.2 Adding a Decoder
Steps:
Click
in the control panel to enter the decoding device management interface.
1.
Click
2.
Enter the Nickname, IP address and port number of the device, and input the user name and password
3.
to get access to it. The nickname is the name you customized and give to the decoder in the client
software.
Or
If you add the decoder with a private domain name, you can check the checkbox before Private
Domain Mode and enter the needed information.
The successfully added decoder device can be viewed in the list.
4.
to add the decoder to the management list of the software.
Figure 5.7 Add a Decoder by IP Address
Figure 5.8 Add a Decoder by DNS Address
42
Advertisement
Table of Contents
