[18.2] When Attaching To The Dsc Zooming Port For Quadrocular Tube; [18.3] When Attaching To The Quadrocular Tilting Tube; [18.4] When Attaching A Camera To The Trinocular Tube - Nikon Eclipse Ni-U Instruction Manual

18.2
When attaching to the DSC zooming port for quadrocular tube
(1) Screw the camera head into the C mount on the
DSC port.
(2) Connect the camera connection connector for the
camera head and the camera connector for the
DS-L3/DS-U3 DS camera control unit using a
provided camera cable.
(3) Connect the EXT.I/O connector for DS-L3/U3 with
the Ex-OUT connector for the microscope or the
Ex-OUT connector for the connector box B using a
camera trigger cable.
For DS-L3, a USB cable can also be used for
connecting the USB (H) connector for DS-L3 and the
USB connector for the connector box B.
Precautions for connecting the camera
trigger cable
When connecting the camera trigger cable with the
DSC connector, be sure to insert it completely.
Prior to photomicrography, adjust the camera
position and adjust the focus on the monitor as
appropriate. (See Chapter 3 "18 Capturing
Images - Photomicroscopy" in the "Operation")
18.3
When attaching to the quadrocular tilting tube
Tool: Hex driver (2 mm across flats)
Attach the tube adapter for quadrocular tube to the
quadrocular tilting tube and tighten the two fixing screws.
Attach a C mount camera, an ENG mount camera or a
photomicrography device via each adapter to the
trinocular tube adapter.
18.4
When attaching a camera to the trinocular tube
Attach a C mount camera, an ENG mount camera or a
photomicrography device via an adapter to the trinocular
tube.
Chapter 1
Assembly
Attaching a camera to the DSC zooming port
Tube adapter for
quadrocular tube
fixing screw
Attaching the tube adapter for quadrocular tube
21
Camera connection connector
Camera head
C mount
for quadrocular tube
Camera connection
connector
Camera head
Tube adapter
for quadrocular
tube