Nikon Eclipse Ni-U Instruction Manual page 31

CONTACT ARM2
(Connect to CONTACT ARM2
on control box B)
LAMP
(Connect to dia-illumination
lamphouse)
AC inlet
(Connect to AC power supply via
power code)
REMOTE
(Connect to simple remote
control pad)
HGFIE
(Connect to RS232C on motorized HG
precentered fiber illuminator)
Ex-OUT
(Connect to EXT.I/O on DS-L3/U3)
AC inlet
(Connect to AC power supply via
power code)
(Connect to DSC on Ni-U main body
Chapter 1
Assembly
MODEL ECLIPSE Ni-U
NIKON CORPORATION 100–240V~
TOKYO, JAPAN 9 2 0 0 0 1
1.7A
50/60Hz M A D E I N J A P A N
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est confirme à la norme NMB-003 du Canada.
INSPECTION
EQUIPMENT
4N75
LAMP
DC12V 100W
CAUTION!
-High Temperature-
1. Do not touch the lamphouse while the lamp is lit.
The surface of the lamphouse becomes hot when the
lamp is on.
2. Turn off the power and allow the lamp and lamohouse
to cool enough before replacing the lamp.
Wait for at least 30 minutes after turning off the
lamp.
3. Use 12V100W HALOGEN lamp only.
HALOGEN 12V100W
NI-LH
JAPAN
9 5 2 0 0 1
Ni-U main body rear
CONTACT
ARM1
HGFIE REMOTE
USB
DSC
(Ni-U)
CONTACT
ARM2
Ex-OUT
EPI
SHUTTER
100-240V~
1.0A
50/60Hz
Control box B rear
CAMERA
(Connect to camera head)
EXT.I/O
or Ex-OUT on control box B)
DS-L3 DS camera control unit
23
CONTACT ARM1
(Connect to CONTACT ARM1 on
control box B)
DSC
(Connect to DSC (Ni-U) on
control box B or EXT.I/O on DS-L3/U3)
LAMP CTRL (BOX B)
DSC
(Connect to LAMP CTRL (Ni-U) on
control box B)
LAMP CTRL
(BOX B)
CONTACT ARM1
(Connect to CONTACT ARM1 on contact arm)
LAMP CTRL(Ni-U)
(Connect to LAMP CTRL (BOX B) on Ni-U main
body)
LAMP
CTRL
(Ni-U)
USB connector
(Connect to USB (H) on DS-L3 or PC)
DSC(Ni-U)
(Connect to DSC on Ni-U main body)
CONTACT ARM2
(Connect to CONTACT ARM2 on contact arm)
DIA
SHUTTER
DIA SHUTTER
(Connect to DIA motorized shutter)
EPI SHUTTER
(Connect to EPI motorized shutter)
USB(H)
(Connect to USB on control box B)