Drive Motor (Buffer/Transport) And Belt (Buffer/Transport) Removal - Lexmark X850e Service Manual

7500-XXX

Drive motor (buffer/transport) and belt (buffer/transport) removal

1.
Remove the rear upper cover. See
2.
Remove the two screws securing the bracket (A) on the rear of the finisher.
3.
Move the bracket slightly.
Note: It is not necessary to remove the bracket from the finisher. It should only be slightly moved to
provide better access to the drive motor (buffer/transport) (B) for removal.
4.
Loosen the two screws securing the belt tensioner bracket (C) to the finisher, and move it down as shown.
5.
Remove the belt (buffer/transport) (D) from the drive motor (buffer/transport).
Second
4-192
Options Service Manual
"Rear upper cover removal" on page
C
C
First
4-101.
Connector
D
A