Lexmark X850e Service Manual page 120

7500-XXX
Error code or
message
284.03
Paper jam
Check area G2
284.04
Paper jam
Check area H
284.05
Paper jam
Check areas H,
G3
285.00
Paper jam
Check area H
286.00
Paper jam
Check area H
287.00
Paper jam
Check area F
287.01
Paper jam
Check area F
287.02
Paper jam
Check areas
G1, G3
2-52
Options Service Manual
Error contents
Sensor (lower media exit) on
jam C
Sensor (lower media exit) off
jam B
Sensor (lower media exit)
Static jam
Finisher eject set jam
Sensor (compiler media in)
Static jam
Sensor (upper media exit) on
jam A
Sensor (upper media exit) off
jam A
Sensor (upper media exit) on
jam B
Description/action
Finisher sensor (lower media exit) not turned on within
the specified time after the sensor (buffer path) is turned
on.
Go to "284.03 Sensor (lower media exit) on jam C" on
page 2-86.
Finisher sensor (lower media exit) is not turned off within
the specified time after the finisher sensor (lower media
exit) is turned on.
At this time, the sensor (finisher media entrance) is
turned on.
Go to "284.04 Sensor (lower media exit) off jam B."
on page 2-88.
Paper remains on the sensor (lower media exit).
"284.05 Sensor (lower media exit) static jam"
Go to
on page 2-90.
Finisher sensor (compiler media in) is not turned on
within the specified time after the media eject motor is
turned on.
Go to "285.00 Finisher eject set jam" on page
Paper remains on the sensor (compiler media in).
Go to "286.00 Sensor (compiler media in) static jam"
on page 2-93.
The sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media entrance)
is turned on.
At this time, the sensor (bridge unit media exit) is turned
on.
Go to "287.00 Sensor (upper media exit) on jam A"
on page 2-94.
The sensor (upper media exit) is not turned off within the
specified time after the sensor (upper media exit) is
turned on.
At this time, the sensor (bridge unit media exit) is turned
on.
Go to "287.01 Sensor (upper media exit) off jam A."
on page 2-96.
The sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media entrance)
is turned on.
At this time, the sensor (bridge unit media exit) is turned
on.
Go to "287.02 Sensor (upper media exit) on jam B"
on page 2-98.
2-92.