Upper Media Transport Roll Assembly Removal - Lexmark X850e Service Manual

7500-XXX

Upper media transport roll assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Remove the left lower cover. See
5.
Remove the left upper cover. See
6.
Remove the punch carriage assembly. See
7.
Open the upper pinch guide assembly (A) toward the right.
8.
Remove the two screws securing the bracket (B) on the rear of the finisher.
Front
9.
Move the bracket (B) slightly toward the exit side of the finisher.
Note: It is not necessary to remove the bracket from the finisher; it should only be slightly moved to
provide better access to the two upper media transport roll assemblies (C) for removal.
B
Rear
4-188
Options Service Manual
"Rear upper cover removal" on page
"Top cover removal" on page
"Left lower cover removal" on page
"Left upper cover removal" on page
A
D
Second
4-96.
"Punch carriage assembly removal" on page
D
F
F
First
4-101.
4-105.
4-106.
4-118.
Front
B
G