7500-XXX
Preface
Service information for the Lexmark X850e, X852Ee, and X854e is contained within two service manuals:
•
MFP Service Manual–Contains specific service information for the MFP and includes the options error
codes.
•
Options Service Manual–Contains specific service information for the 2X 500-Sheet Drawer (2TM), High
Capacity Feeder, and Finisher.
This manual contains maintenance procedures for service personnel. It is divided into the following chapters:
1.
General information contains a general description of the printer and the maintenance approach used to
repair it. Special tools and test equipment are listed, as well as general environmental and safety
instructions.
2.
Diagnostic information contains an error indicator table, symptom tables, and service checks used to
isolate failing field replaceable units (FRUs).
3.
Diagnostic aids contains tests and checks used to locate or repeat symptoms of printer problems.
4.
Repair information provides instructions for making printer adjustments and removing and installing
FRUs.
5.
Component locations uses illustrations to identify the component locations and test points on the printer.
6.
Preventive maintenance contains the lubrication specifications and recommendations to prevent
problems.
7.
Parts catalog contains illustrations and part numbers for individual FRUs.
Definitions
Note: A note provides additional information.
Warning: A warning identifies something that might damage the product hardware or software.
CAUTION: A caution identifies something that might cause a servicer harm.
CAUTION: When you see this symbol, there is a danger from hazardous voltage in the area of the
product where you are working. Unplug the product before you begin, or use caution if the product
must receive power in order to perform the task.
xvi
Options Service Manual