500-Sheet Drawer (2Tm)-Media Feed Unit Drive Gear - 13 Tooth Removal - Lexmark X850e Service Manual

2X 500-sheet drawer (2TM)—media feed unit drive gear - 13 tooth removal
1.
Remove the media feed unit assembly. See
removal (tray 3)" on page 4-9
(tray 4)" on page
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: Gears may become detached from the bracket (A).
5.
Remove the tray lift one-way clutch assembly. See
clutch assembly removal" on page
6.
Remove the media feed unit drive gear - 13 tooth (B).
Clamp
Note: Before re-installing, ensure all gears and washers are securely attached to the bracket (A).
"2X 500-sheet drawer (2TM)–media feed unit assembly removal
or
4-11.
4-19.
Harness
A
Rear
"2X 500-sheet drawer (2TM)–media feed unit assembly
"2X 500-sheet drawer (2TM)–tray lift one-way gear
Washer
Washer
B
7500-XXX
4-21
Repair information