Hcf Pick Roll Shaft Assembly Removal - Lexmark X850e Service Manual

HCF pick roll shaft assembly removal

1.
Open the HCF top door.
2.
Open the HCF feed unit assembly.
3.
Remove the HCF pick roll assembly. See
4.
Use a prying tool to remove the e-clip securing the HCF pick roll shaft assembly (A) to the HCF media feed
unit assembly (B).
5.
Remove the bushing (C) from the HCF media feed unit assembly (B).
6.
Remove the bearing (D) from the HCF media feed unit assembly (B).
7.
Remove the HCF pick roll shaft assembly (A).
E-ring
"HCF pick roll assembly removal" on page
C
Front
7500-XXX
4-68.
B
D
A
Repair information
4-67