7500-XXX
Stacker media bin block to stack media
Bridge unit assembly
Media size and weight
The following shows media sizes and weights that the finisher can handle, as well as applicable functions for
each media size.
The printer and the finisher handle different media sizes and weights. For this reason, if the printer has printed
media that the finisher cannot handle, the exit 1 diverter gate in the printer is switched to eject the media from
Exit 2 onto the bridge unit assembly. Refer to the Printer Service Manual for additional information on the printer.
1-22
Options Service Manual
Punch unit
Stacker media bin
Compiler tray
Stapler