Throttle Cable Free-Play; Engine Rpm (Idle) - Arctic Cat 2014 400 ATV Service Manual

2. Adjust the throttle cable free-play to specifications
(see Periodic Maintenance - Adjusting Throttle
Cable); then tighten the jam nut securely and install
the throttle arm cover.
3. Install the carburetor onto the engine making sure the
alignment lug on the carburetor is between the two
tabs on the air intake pipe; then tighten the clamp
securely.
KC264A
KC263
4. Connect the intake air housing and tighten all clamps
and mounting hardware securely.
KC258A
5. Install the gas tank (see Gas Tank in this section).

Throttle Cable Free-Play

To adjust throttle cable free-play, see Periodic Mainte-
nance.

Engine RPM (Idle)

KC266
To adjust the idle RPM, see Periodic Maintenance -
Adjusting Engine RPM (Idle).
KC245A
KC256A
KC257
83