Engine/Transmission - Arctic Cat 2014 400 ATV Service Manual

Engine/Transmission

This section has been organized into sub-sections which
show a progression for the complete servicing of the Arc-
tic Cat ATV engine/transmission.
To service the center crankcase halves, the engine/trans-
mission must be removed from the frame. To service
top-side, left-side, and right-side components, the
engine/transmission does not have to be removed from
the frame.

NOTE: Arctic Cat recommends the use of new gas-
kets, lock nuts, and seals and lubricating all internal
components when servicing the engine/transmis-
sion.
32
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appro-
priate tool description.
Description
Crankcase Separator/Crankshaft Remover
Magneto Rotor Remover Set
Oil Filter Wrench
Piston Pin Puller
Spanner Wrench
Surface Plate
V Blocks

NOTE: Special tools are available from the Arctic
Cat Service Department.
p/n
0444-152
0444-254
0644-389
0644-328
0444-251
0644-016
0644-535