1900 - 1999, Tape Drive Test Error Codes; 2400 - 2499, Advanced Vga Board Test Error Codes - Compaq ProLiant ML330 Maintenance And Service Manual

3-42 Compaq ProLiant ML330 Maintenance and Service Guide
1900 – 1999, Tape Drive Test Error Codes
The 1900 series of diagnostic error codes identifies failures with tape cartridges, tape drives,
tape drive cabling, adapter boards, or the Server Feature Board assembly.
Error Code
1900-XX
1901-XX
1902-XX
1903-XX
1904-XX
1905-XX
1906-XX
2400 – 2499, Advanced VGA Board Test Error Codes
The 2400 series of diagnostic error codes identifies failures with video boards, monitors, or the
Server Feature Board assembly.
Error Code
2402-XX
2403-XX
2404-XX
2405-XX
2406-XX
2407-XX
2408-XX
2409-XX
Tape Drive Test Error Codes
Description
Tape ID failed.
Tape servo write failed.
Tape format failed.
Tape drive sensor test failed.
Tape BOT/EOT test failed.
Tape read test failed.
Tape write/read/compare test failed.
Advanced VGA Board Test Error Codes
Description
Video memory test failed.
Video attribute test failed.
Video character set test failed.
Video 80x25 mode 9x14 character cell
test failed.
Video 80x25 mode 8x8 character cell test
failed.
Video 40x25 mode test failed.
Video 320x320 mode color set 0 test
failed.
Video 320x320 mode color set 1 test
failed.
Table 3-13
Recommended Action
1. Replace the tape cartridge and retest.
2. Check the signal cable, replace if
necessary, and retest.
3. Check the switch settings on the adapter
board (if applicable).
4. Replace the tape adapter board (if
applicable) and retest.
5. Replace the tape drive and retest.
6. Replace the Server Feature Board and
retest.
Table 3-14
Recommended Action
1. Run the BIOS Setup Utility.
2. Replace the monitor and retest.
3. Replace the Server Feature Board or other
video and retest.
continued