1700 - 1799, Hard Drive Test Error Codes; Hard Drive Test Error - Compaq ProLiant ML330 Maintenance And Service Manual

1700 – 1799, Hard Drive Test Error Codes
The 1700 series of diagnostic error codes identifies failures with hard drives, hard drive
controller boards, hard drive cabling, and system board functions. If the system uses a drive
array controller, see the "Array Diagnostic Utility (ADU)" section of this chapter.
Error Code
1700-XX
1701-XX
1702-XX
1703-XX
1704-XX
1705-XX
1708-XX
1709-XX
1710-XX
1715-XX
1716-XX
1717-XX
1719-XX
1736-XX
1799-XX
Hard Drive Test Error Codes
Description
Hard drive ID drive types test
failed.
Hard drive format test failed.
Hard drive read test failed.
Hard drive write/read/compare
test failed.
Hard drive random seek test
failed.
Hard drive controller test failed.
Hard drive format bad track test
failed.
Hard drive reset controller test
failed.
Hard drive park head test failed.
Hard drive head select test failed.
Hard drive conditional format test
failed.
Hard drive ECC (error checking
and correcting) test failed.
Hard drive power mode test failed.
Drive monitoring failed.
Invalid hard drive type failed.
Diagnostics and Troubleshooting 3-41
Table 3-12
Recommended Action
1. Ensure that the hard drive signal and power cables
are seated properly and retest.
2. Replace the hard drive signal and power cables
and retest.
3. Replace the hard drive data cable and retest.
4. Replace the hard drive and retest.
5. Replace the Server Feature Board and retest.
6. Replace the system board and retest.