Compaq ProLiant ML330 Maintenance And Service Manual page 60

3-16 Compaq ProLiant ML330 Maintenance and Service Guide
Table 3-2
POST Error Messages
Error Code
912-Intruder Alert
914-Intruder
Message
1151-Com Port 1
Address
Assignment
Conflict.
1151-Serial Port A
Address Conflict
Detected
1152-Com Port 2,
3, or 4 Address
Assignment
Conflict.
1152-Serial Port B
Address Conflict
Detected
1155-Serial Port
Address Conflict
Detected
continued
Audible Beeps Probable Source of
Problem
None The bezel (front
cover) is not
installed.
The bezel (front
cover) was removed
since last power up.
None Hood Lock Coil is not
connected.
2 short Both external and
internal serial ports
are assigned to
COM1.
2 short A hardware conflict
is preventing the
normal operation of
a serial port.
2 short Both external and
internal serial ports
are assigned to
COM2, COM3, or
COM4.
2 short A hardware conflict
is preventing the
normal operation of
a serial port.
2 short A hardware conflict
is preventing the
normal operation of
a serial port.
Action
Verify that system access was
authorized.
Check the hardware connection to the
hood lock coil.
Run the BIOS Setup Utility and correct.
Run the BIOS Setup Utility to reassign
the serial port address and manually
resolve the conflict.
Run the BIOS Setup Utility and correct.
Run the BIOS Setup Utility to reassign
the serial port address and manually
resolve the conflict.
Run the BIOS Setup Utility to reassign
the serial port address and manually
resolve the conflict.
continued