Processor With Heatsink - Compaq ProLiant ML330 Maintenance And Service Manual

2-18 Compaq ProLiant ML330 Maintenance and Service Guide

Processor with Heatsink

To remove a processor with heatsink:
1. Complete the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the front bezel. See "Front Bezel" earlier in this chapter.
3. Remove the access panel. See "Access Panel" earlier in this chapter.
4. Unplug the processor fan
Figure 2-15. Unplugging the processor fan from the system board
CAUTION: Electrostatic discharge can damage electronic components. Be sure you are
properly grounded (earthed) before beginning any installation procedure. See "Electrostatic
Discharge Information" earlier in this chapter for more information.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching.
from the system board.


1