Table of Contents
Advertisement
Locating Lighting, Operation and Rating
Information Plate
WARNING
!
DO NOT ATTEMPT TO TOUCH THE DATA PLATE
WHILE THE FIREPLACE IS STILL HOT! Let the
fi replace cool fi rst before touching it.
The Lighting, Operation and Rating information is
located on a plate at the right hand side of the fi replace
opening. The plate slides out from under the plinth.
Window
The rating plate is located on the bottom of the appli-
ance behind the front panel on the valve access side.
To access the plate, remove the barrier screen, side
doors and the plinth. Grab the return edge of the
plate and slide it out of its rails. There is important
information on both sides of the plate.
Servicing Your Fireplace
If any attention is required for your appliance, contact
your supplier quoting the model number. It will be
helpful if the appliance's serial number can also
be quoted. This number is on the rating plate. The
replacement parts are shown at the end of this manual.
Please always quote the part number and description
when requesting spare parts.
Owner's Information
Data
plate
Operating Your Fireplace
There are two ways to control your fi replace.
1. Thermostatic Remote Control;
2. Wall Switch.
The Thermostatic Remote Control can be programmed
to function automatically—see pages 11–15.
The Wall Switch can be used to turn on, off and to
increase or decrease the fl ame height—see page 16.
Thermostatic
Remote Control
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your fi replace.
Press and hold the OFF button for a second (either on
the handset or the wall switch).
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
Remote control handset
OWNER'S
INFORMATION
Wall Switch
Wall Switch
9
Advertisement
Table of Contents
