Table of Contents
Advertisement
QUALIFIED
INSTALLER
Refi t Window
1. To refi t the window, place it in its bottom railing and
push its top against the fi rebox. Ensure there is
no glass or vermiculite particles in the bottom
railing.
IMPORTANT: To ensure a safe operation,
verify that the levers are hooked properly to the
window tabs; then, pull out the top of the window
and release it to insure the springs return it.
Also, double-check that the bottom of the
window frame is correctly installed in its the
bottom railing.
2. While you hold it, pull the side levers back into the
window brackets on each side.
3. Apply light hand pressure against the window frame
sides to bed-in the window seal.
Section Views
4. If the Hot Glass Warning plates have been
removed from the front lower corner of the
windows, reinstall it by sliding it between the
glass and the frame as indicated.
Hot Glass Warning Plate
46
Installation
Bottom railing
Valve
Battery slider
Window frame
Advertisement
Table of Contents
