Table of Contents
Advertisement
OWNER'S
INFORMATION
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner can
not come on. The pilot will remain on if it is lit.
• Alternately, remove all batteries from the battery box
as well as the battery from the handset.
Window
Receiver
Gas valve
The battery box and the gas valve are located on the
bottom of the appliance behind the front panel on the
valve access side.
10
Owner's Information
Gas valve
Battery box in carrier
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 15 in the Remote Control
Operation section for a description of this feature.
Advertisement
Table of Contents
