Locating Lighting, Operation And Rating Information Plate; Servicing Your Fireplace; Operating Your Fireplace; How To Turn Your Fireplace Off (Including Pilot) - Valor Portrait 530ILN/ILP Installation & Owner's Manual

OWNER'S
INFORMATION
Locating Lighting, Operation and Rating
Information Plate
WARNING
!
DO NOT ATTEMPT TO TOUCH THE DATA PLATE
WHILE THE FIREPLACE IS STILL HOT! Let the
fi replace cool fi rst before touching it.
The Lighting, Operation and Rating information is
located on a plate under the fi rebox.
To access the plate, remove any fret or access panel
and grab the plate and slide it out to read it. There is
important information on both sides of the plate.

Servicing Your Fireplace

If your appliance require any attention, contact your
supplier quoting the model number. It will be helpful if
the appliance serial number can also be quoted. This is
on the rating plate located under the fi rebox. The repair
parts are shown in the separate repair parts leafl et.
Please always quote part number and description when
requesting spare parts.

Operating Your Fireplace

There are three ways to control your fi replace.
1. Thermostatic Remote Control;
2. Manual On/Off Switch;
3. Wall Switch (optional) .
The Thermostatic Remote Control can be programmed
to function automatically—see pages 9–13.
The manual On/Off switch must be ON for the fi replace
to function. It can be used to shut off the fi replace in
case of emergency—see above.
The Wall Switch (optional) can be used to turn on, off
and to increase or decrease the fl ame height—see
1265WSK—Wall Switch Kit.
NOTE: The remote control in the AUTO mode will
override the wall switch.
Thermostatic Remote
Wall Switch
Control
(optional)
8
Owner's Information
ON
OFF
Manual On/Off Switch

How to Turn Your Fireplace OFF (including pilot)

Familiarize yourself with each of these methods before
operating your fi replace.
Handset and Wall Switch: Press and hold the OFF
button for a second (either on the handset or the wall
switch).
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
Remote control
handset
Manual ON/OFF Switch: Press the O button.
ON
OFF
Valve Switch
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• You can prevent your fi replace from lighting by
pressing the O button on the manual ON/OFF
switch on the gas valve—see image above.
• Alternately, you can remove all batteries from the
receiver as well as the battery from the handset.

Automatic Shut-Off (in certain conditions)

Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 13 in the Remote Control
Operation section for a description of this feature.
Wall Switch
(optional)
O