Install Murano Glass Fire - Valor 1600IN Installation & Owner's Manual

6. Some vermiculite may be added outside the burner
on the platform if desired.
7. Place the rocks on the platform as shown below.
You can also place one or two rocks on the
vermiculite as shown.
Long Beach Driftwood Kit installed

Install Murano Glass Fire

Material required
• Middle platform brackets (supplied with appliance)
• Vermiculite platform (supplied with appliance)
• Small container to distribute fi re glass (not included)
• Murano Glass Fire Kit, which contains:
◊ 1 bag of blue azura fi re glass
◊ 1 bag of black fi re glass
◊ 1 glass platform
IMPORTANT: For safety reasons, use only the fi re
glass provided with your Valor fi replace or the tem-
pered crushed fi re glass brands American Fireglass™
or fi regear. The use of any other fi re glass products
may void your fi replace warranty.
Installation
CHOKING HAZARD! Ensure that the fi replace
area is clear of vermiculite particles as these could
be ingested by small children. Vacuum area after
installation.
Installation
Carefully unpack the kit.
1. Install both platform brackets on each side of the
burner, with the tabs downward fi tting the bracket
tabs into the burner support's slots as indicated.
Top
Bottom
QUALIFIED
INSTALLER
WARNING
!
43