QUALIFIED
INSTALLER
Install Liners
The liners install in the manner outline below. Unpack
them carefully as they are fragile.
Ceramic panels
1. Identify the top and bottom (fi re) sides of the top
panel, then slide it between the top panel support
brackets.
Overhanging part sits on
side panel at each end
Top panel orientation
2. Lift the top panel slightly at one end of the fi rebox and
place one side panel against the end wall and side
of the fi rebox ensuring it is well seated against the
fi rebox side.
40
Installation
Top
Underside, fi re side
3. Let the top panel protruding part rest on the cut out of
the upper part of the side panel.
4. Repeat with the other side panel.
Enamel panels
The enamel panels must fi rst be fi tted with the infi ll
panels included in the carton. The top panel is made of
ceramic and is provided with the appliance.
1. Insert the infi ll panels in the hollow part of the
enamel panels as indicated below.
Infi ll panel
2. Install the top and side panels (with infi ll) as
indicated in the previous section Ceramic panels.
Enamel panel—
rear view
Fire side