Toyota OEKAKI 50 Instruction Manual page 19

EN
■ Storing the foot controller
When the foot controller is not being used, it can be stored on the back of the sewing machine.
1
Wind the cord, and place it in the foot controller.
2
Secure the foot controller in the storage area at the
back of the sewing machine, as shown in the
illustration.
* Align the tabs on the sides of the foot controller with the grooves in
the storage space.
■ Removal
With your fingers, press in on the sides of the foot
controller, and then pull it towards you.
Groove
3
2
2
Tab
1
1
1
2
19