Toyota OEKAKI 50 Instruction Manual page 80

■ STEP 3 (Practicing adjusting the stitch width)
For video tutorial, visit http://www.toyotaoekakisewing.com
By practicing several times, we can gain a better understanding of how the stitch width is adjusted by stepping
on the foot controller and moving the fabric.
1
From the operation panel, select stitch number A1 or A2.
2
While slowly moving the fabric, lightly step on the foot controller to begin sewing.
3
Gradually press the foot controller further to
increase the stitch width, according to the outlines of
the drawings.
4
After fully pressing down the foot controller, gradually release it to reduce the stitch width.
5 3
Repeat steps
80
4
to .