EN
■ Zipper insertion
For video tutorial, visit http://www.toyotaoekakisewing.com
With this method, the left side of the zipper is sewn first.
While sewing, do not allow the needle to hit the zipper teeth.
Doing so could break the needle and cause injuries.
1
From the operation panel, select stitch number 1 (straight stitch (center)).
* Check that the OEKAKI (free-motion embroidering) button is not lit.
* Refer to "Selecting the stitch" (page 44).
Suitable stitch
1
2
Select the stitch length
* Refer to "Selecting the stitch length" (page 46).
Caution
Presser foot to be used
Zipper foot
OEKAKI
button
not lit
63